<?xml version="1.0" encoding="gb2312"?>
<rss version="2.0">
<channel>
<title>交换</title>
<link>/net/switch/index.html</link>
<description>网管技术 / 交换</description>
<language>zh-cn</language>
<generator>&lt;a href='http://www.nixsky.com' target='_blank'&gt;Power by nixsky&lt;/a&gt;</generator>
<webmaster>haibo.d@gmail.com</webmaster>
<item>
    <title>三层交换原理</title>
    <link>/net/switch/2007-08/218.html</link>
    <description>一个具有三层交换功能的设备，是一个带有第三层路由功能的第二层交换机，但它是二者的有机结合，并不是简单地把路由器设备的硬件及软件叠加在局域网交换机上。 其原理是：假设两个使用IP协议的站点A、B通过第三层交换机进行通信，发送站点A在开始发送时，把自己的IP地</description>
    <pubDate>2007-08-30</pubDate>
    <category>交换</category>
    <author>秩名</author>
    <comments>Nixsky linux,bsd,unix</comments>
</item>
<item>
    <title>Huawei S3952 VRP升级小记</title>
    <link>/net/switch/2007-07/201.html</link>
    <description>在XXCS项目中，新增了两台S3952作为汇聚交换机，由于网络拓扑的改变，需要在这两个汇聚汇聚交换机上作VRRP。然而，这两台交换机的软件版本比较低，是0224的，不支持VRRP特性，得先升级它的软件，上网找到H3C论坛，上面有一个网友提供了一个账号/密码可以在官方下载到最</description>
    <pubDate>2007-07-01</pubDate>
    <category>交换</category>
    <author>秩名</author>
    <comments>Nixsky linux,bsd,unix</comments>
</item>
<item>
    <title>思科交换机经典问题大全</title>
    <link>/net/switch/2007-05/160.html</link>
    <description>(一)思科关键技术解释 A.关于堆叠技术 1.Catalyst 3500XL/2900XL的堆叠是如何实现的？ a. 需要使用专门的堆叠电缆，1米长或50厘米长(CAB-GS-1M或CAB-GS-50CM)以及专门的千兆堆叠卡GigaStack GBIC (WS-X3500-XL) (该卡已含CAB-GS-50CM 堆叠电缆)。 b. 可以选用2种堆叠方</description>
    <pubDate>2007-05-10</pubDate>
    <category>交换</category>
    <author>秩名</author>
    <comments>Nixsky linux,bsd,unix</comments>
</item>
<item>
    <title>交换机与配线架端口四种快速配对方法</title>
    <link>/net/switch/2007-05/159.html</link>
    <description>在组建局域网时，按照综合布线的一般规范，施工中应使用带有米标的网线或在两侧水晶头处套专用异型号码管，并在机柜处做与米标或号码管相对应的计算机标识记录。 许多单位原来计算机的数量很少，后来逐步添加了一些计算机，组成具有一定规模的局域网，而原来组网时并没</description>
    <pubDate>2007-05-10</pubDate>
    <category>交换</category>
    <author>秩名</author>
    <comments>Nixsky linux,bsd,unix</comments>
</item>
<item>
    <title>交换机配置之交换机高级配置的常见命令</title>
    <link>/net/switch/2007-05/158.html</link>
    <description>在交换机的高级配置中，通常是利用以上配置菜单中的［K］ Command Line项进行的。 Cisco交换机所使用的软 件系统为Catalyst IOS。CLI的全称为Command－Line Interface，中文名称就称之为命令行界面，它是一个基于DOS命令行的软件系统模式，对大小写不敏感（即不区分大</description>
    <pubDate>2007-05-10</pubDate>
    <category>交换</category>
    <author>秩名</author>
    <comments>Nixsky linux,bsd,unix</comments>
</item>
<item>
    <title>2924配置</title>
    <link>/net/switch/2007-05/157.html</link>
    <description>2924-56-#9#show config Using 1442 out of 32768 bytes ! version 12.0 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname 2924-56-#9 ! enable secret 5 $1$dksB$3XRWWQe5cSBk.qwbZaGIJ. ip</description>
    <pubDate>2007-05-10</pubDate>
    <category>交换</category>
    <author>秩名</author>
    <comments>Nixsky linux,bsd,unix</comments>
</item>
<item>
    <title>2900XL, 3500XL, 2950, 3550密码恢复</title>
    <link>/net/switch/2007-05/156.html</link>
    <description>Step-by-Step 1. 9600 baud rate No parity 8 data bits 1 stop bit No flow control 2.Unplug the power cable. 3.The system has been interrupted prior to initializing the flash file system. The following commands will initialize the flash file system, and</description>
    <pubDate>2007-05-10</pubDate>
    <category>交换</category>
    <author>秩名</author>
    <comments>Nixsky linux,bsd,unix</comments>
</item>
<item>
    <title>Huawei交换机封MAC地址方法</title>
    <link>/net/tech/2007-03/37.html</link>
    <description>acl number 4000 rule 0 deny arp ingress 000d-5608-5d10 0000-0000-0000 egress any rule 1 deny ip ingress 000d-5608-5d10 0000-0000-0000 egress any 必须申明什么协议，否则在应用acl的时候会出错</description>
    <pubDate>2007-03-10</pubDate>
    <category>网管技巧</category>
    <author>秩名</author>
    <comments>Nixsky linux,bsd,unix</comments>
</item>

</channel>
</rss>
